ASI Controls Products

The ASIC/2-7540 is the most powerful, flexible, and I/O capable controller in the ASI Controls line. Ready to supervise a network of ASIC/1's in a building or sub-network within a large facility, within high point count, multi-zone, green building, and other demanding settings. Suitable for controlling of large equipment and many other applications. Support for Modbus, acting as Modbus RTU master on the local bus.

The ASIC/2-8540, a powerful configurable controller for applications where I/O count does not require an ASIC/2-7540. Capable of handling automation needs for small facilities, controlling devices, supervisory duties, multi-zone and other applications. Support for Modbus, acting as Modbus RTU master on the local bus.

The SINC/3-3000 system interface and network controller is intended for situations where a controller is required for communications, polling or other supervisory duties but no I/O points are required. Suitable for all ASIC/2 applications.

The ASIC/1-6000 pre-programmed digital controller is an integrated VAV controller and actuator. Suitable for pressure-independent or pressure-dependent applications, can be used with electric heat, hot water valve reheat, and fan powered boxes.

The ASIC/1-6000-PD pre-programmed digital controller is an integrated VAV controller/actuator suitable for pressure-dependent applications. The ASIC/1-6000-PD can be used with electric heat, hot water valve reheat, and fan powered boxes.

The ASIC/1-6000-MB pre-programmed digital controller is a VAV controller mounted on a metal base. Featuring an onboard calibraded airflow sensor, it is suitable for pressure-independent applications, and can be used with electric heat, hot water valve reheat, and fan powered boxes.

The ASIC/1-6000-MB-PD pre-programmed digital VAV controller suitable for pressure-dependent applications. The ASIC/1-6000-MB-PD can be used with electric heat, hot water valve reheat, and fan powered boxes.

The ASIC/1-8655 pre-programmed digital rooftop controller can be used to control heat pumps or packaged A/C units with up to four stages of cooling, two stages of heating, and one additional auxiliary stage. Controls economizer position based on mixed or discharge air temperature, or CO2 level, and other applications.

The ASIC/1-8755 pre-programmed VAV tracking controller. Personalities for cooling only, and cooling with hot water or electric reheat.

ASI WebLink is the web based interface for ASI control systems, delivering real-time system data to your browser. WebLink, an OPC client, can connect to OPC Servers from other control manufacturers and ODBC data sources to deliver true interoperability. Unlimited point count.

ASI ZoneDial software provides a telephone interface for requesting after-hours overrides from ASI Controls systems. Typically used to manage tenant requests for HVAC and/or lighting services outside of normal lease hours. ZoneDial provides an audit trail for every phone call and generates detailed invoices that are ready to print and mail.

ASI OPC Server delivers interoperability between ASI Controls systems and any OPC enabled software. Use OPC to connect ASI systems with other manufacturer's OPC enabled devices or networks.

ASI Monitor provides alarm and event monitoring, and automated notification to an individual or group by numeric pager, cell phone, or email.

ASI Visual Expert configures ASI Controls systems, providing intuitive drag and drop graphical editing of control sequences. Displays real-time system data in custom web browser screens.

MobileXpert provides a fully functional configuration and diagnosis front end interface for ASI Control systems in a Windows-CE powered PDA device. Comes with pre-built screens for all ASI devices.

ASI Controls Etherlink/2 is a low-cost device to connect an ASI controller or networked control system over Ethernet, enabling internet browser viewing and editing of real-time data when combined with LinkOPC and WebLink.

The ASI-C/R Converter Repeater is used to connect more than 32 controllers on a sub-network or network, to extend an RS-485 bus over 4,000 feet, or to protect exposed lines in a network from lightning strikes

ASI Controls line of sensors and other accessories are designed to work optimally with the ASI Controls line of controllers, network devices and other products.

The ePAD Operator Panel is a convenient compact interface for panels and other settings. Fully customizable 4 line by 20 character display, scrolling through 20 lines. Customization is done on a PC and synchronized.